How is Window Tinting Done on Car Windows?

 There is a high demand for window film tinting installation in homes, with more and more people becoming aware of the aesthetic and protective benefits of the same. It is a workable solution to a lot of problems, such as personal health issues - caused by sun damage, fading of interior furnishings, privacy, intrusion etc. With technological advances in the development of window films it is possible to get a tint solution appropriate for your needs.

Some of the films are specifically designed for specific types of application such as UV films for sun protection, tinted films for privacy and protective films for security. Multipurpose films are also available to suit various applications, and these can reduce heat protection as well as UV light. Find out how www.summitwindowtinting.com is done on automotive windows.

The Basics

Window Tinting TacomaWA is difficult to apply because of the geometry principles involved. If all windows were of flat size, it would be comparatively simple to do window tinting by application of a flat plastic sheet to a flat glass sheet. But most automotive glasses are not flat. These comprise of curved surfaces, which leads to difficulties during window tinting.

Naturally, a lot of care must be taken to mate the flat tint film surface successfully with the window curvature. Generally, this is achieved by cutting very precise and extremely small relief triangles from the window tint edges. Each triangle side needs to be exactly straight and precisely of the same length. Otherwise, the anomalies will be apparent.

The Actual Process

First and foremost, the window must be cleaned in order to make the surface spotless. The whole surface must be scraped with a sharp razor blade that can help peel away any residual dust, dirt or a glue layer which cannot be erased with the help of glass cleaning solutions. Razor blades are comparatively hard and glass surfaces are softer in nature. Naturally, even the slightest error can lead to big ugly scratches on glass surface - which cannot be concealed by any amount of window tinting.

It is only after proper polishing and cutting that the tint Tacoma sheet can be pasted onto car windows and the process can be completed.